How To Remove Adhesive Residue
Adhesive residue can often be left behind when removing stickers, wallpaper or tape, leaving you with an unsightly mess. If you're looking for the simplest and quickest way of removing this sticky residue then read our how-to guide for step-by-step instructions.
Perfect for all DIY enthusiasts, this guide ensures you have all the knowledge at your fingertips to tackle adhesive challenges with ease, leaving your surfaces clean and residue-free.
Essential Tools & Equipment
Step 1: Prepare Your Workspace
-
Before starting, make sure you're in a well-ventilated area to avoid inhaling any fumes.
-
Wear protective gloves to safeguard your skin from the solvent.
Step 2: Apply the Solvent
-
Spray a moderate amount of solvent spray onto the adhesive residue, making sure that an even coating has been applied.
Step 3: Let the Solvent Work
-
After applying the solvent, wait a few minutes to let it penetrate and soften the dried adhesive.
-
Be sure to allow sufficient time otherwise you may find it difficult to remove.
Step 4: Wipe Away the Residue
-
Using a microfibre cloth, gently wipe the treated area.
-
The sticky residue should come off quite easily.
-
If not, apply a little more solvent and repeat the wiping process until the surface is clean.
Step 5: Clean the Surface
-
Once all the residue is removed, use a clean part of the cloth to wipe the surface, ensuring no solvent or adhesive remains.
-
Your surface should now be clean and residue-free.
